User guide

Setting Up MimioBoard

13. Insert a drywall anchor into each of the two holes so that each anchor is flush with the

surface of the wall.

The included anchors are for use with drywall only. For concrete walls, use concrete

anchors (not included).

14. For each of the brackets, do the following:

a. Align the slot in the bracket with the hole on the bottom of the MimioBoard and

the drywall anchor.

b. Using a screw driver and an #6x⅜ in (M3x8.5mm) screw, securely fasten the bracket

to the bottom of the MimioBoard.

c. Using a screw driver and a #10x2½ in (M5x60mm) screw, securely fasten each

bracket to the wall.