User guide
Getting Started
To install MimioBoard
1. Make a mark on the wall at the height you want the top of the MimioBoard to be
located.
2. Using a level, draw a horizontal line starting at the mark.
3. Align the mounting bar with the horizontal line and make a mark on the wall in the
center of four of the holes in the mounting bar.
The mounting bar must be securely attached to studs or other solid support. The
mounting bar supports the full weight of the MimioBoard. Extra care must be taken
to ensure that the full weight of the board can be supported.
4. Drill a hole at each mark using a ΒΌ in (6.35 mm) drill bit.
6