Specifications

3-18
Setting the media width
When you know the width of the media to use, you can record the media width. (Supported from the
firmware ver.2.00)
1
When <LOCAL> is displayed, press the
key.
2
Press the key.
3
Select the type 1 to 4 with the
key, and press the key.
4
Select the [MEDIA DETECT] with the
key, and press the
key.
5
Select the [MEDIA WIDTH] with the
key, and press the key.
6
Press the keys and input the
width of the media to be used. Then,
press the key.
• AUTO ： The media width is detected automatically.
210 ～ 1620mm ：Input the media width manually.
7
Press the key to finish.
<LOCAL . 1>
FUNCTION
FUNCT I ON
SET UP <ENT>
ENTER
SET UP
SELECT : TYPE1
ENTER
[1]
MED I A DETECT < e n t >
ENTER
[1]MEDIA DETECT
MED I A WI DTH < e n t >
ENTER
[1]MEDIA DETECT
MED I A WI DTH : AUTO
ENTER
END