Specifications

3-2
If dots misalign
When the thickness of the media, the height of the head, the type of the ink used or the dot size of data to
be printed is changed, follow the steps below and adjust the ink drop position for Bi-directional (Bi) printing
to print properly.
Example of Pattern printing
1
Set a media, and then set the printing origin. ( P.2-10)
• For printing the pattern, a larger media than 500mm width x 400mm feeding is required.
2
When <LOCAL> is displayed, press the
key.
3
Select [MAINTENANCE] with the
key, and press the key.
4
Select [DROP.POScorrect] with the
key, and press the key.
5
Select resolution with the key,
and press the key.
• Resolution ： 300, 600, 1200
6
Select mode with the key, and
press the key.
• Mode ： Normal, High
7
Select dot size with the key,
and press the key.
• Specify the Large dot size of data to be printed in online printing.
Dot size ： 1 to 12
8
Press the key to start the pat-
tern drawing.
• Pattern is printed.
100
A straight line is printed at 140 position in the
positive direction.
In this case, the dot position correction value is 140.
Output
direction
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE <ENT >
ENTER
MA I NTENANCE
DROP . POS c o r r e c t < e n t >
ENTER
DROP . POS c o r r e c t
DP I : 60 0
ENTER
DROP . POS c o r r e c t
MODE : NORMA L
ENTER
DROP . POS c o r r e c t
DOT S I ZE L a r g e : 4
ENTER
DROP . POS c o r r e c t
PR I NT START : e n t
ENTER