Specifications

2-36
Drawing an image from data
Starting the drawing
1
Set a media ( P.2-10).
2
When drawing on a roll media, check
the heater temperature.
• Check the CONSTANT lamp is lighting on the operation panel.
3
When <LOCAL> is displayed, press the
key.
• <REMOTE> appears and data from the computer can be received.
4
Send a drawing data from the
computer.
• Drawing conditions are displayed.
• As for the sending way of data, see the operation
manual of the software used.
5
Drawing starts.
• The print origin is not changed after drawing.
6
Take out the media after drawing.
• If cutting the media, pull the media to the front with key, and cut with scissors or
others. (Do not cut on the platen. It may damage the machine.)
• If the temperature of the water heating device has not reached the predetermined value, a
message is displayed. It does not draw in such cases. When the display is disappeared,
drawing can be started.
• Data can be sent even if both errors are displayed. Drawing starts after the errors are
disappeared.
<LOCAL . 1>
REMOTE
*REMOTE. 1*
1200X1200
HOST / 1 6 / U / H * * . * *m
Resolution: 1200DPI
HOST is set on priority: “HOST” appears.
PLOT is set on priority:
Print quality (STD/FINE/FAST) appears.
The length of
media drawn
Scanninng speed
N:Standard
H:Double speed
Scan direction
U:Unidirectional
B:Bidirectional
Number of passes