Specifications

2-34
Head cleaning
If test pattern is not normal, execute head cleaning. There are 3 types of head cleaning.
Cleaning by Normal or Hard
1
When <LOCAL> is dipslayed, press the
key.
2
Select a cleaning type with the
key, and press the key.
3
Select execution of cleaning for each
head.
(1) Select the head with the key.
(2) Select execution of cleaning with the
key.
• Select execution of cleaning for the all heads.
Execute cleaning ：The ink cartridge color being set is displayed.
Not execute cleaning ：“ * ” is displayed
4
Press the key.
• Cleaning starts.
• When the cleaning is completed, <LOCAL> is displayed.
5
Execute the test drawing, and check the pattern. ( P.2-32)
• Repeat cleaning and test drawing until the drawn pattern becomes normal.
Normal
Select this when there is a dozen line missed on the test pattern.
P.2-34
Wiping
Select this when there are several lines missed on the test pattern.
The wiper wipes.
P.2-35
Hard
Select this when abnormal pattern is not improved by “Normal”.
P.2-34
<LOCAL . 1>
CLEANING
CLEAN I NG
TYPE : ha r d
ENTER
CLEAN I NG
HEAD :MM C CYYKK
CLEAN I NG
HEAD :MM
* CYYKK
ENTER