Specifications

2-32

Test drawing

Make test drawing to check blur or missing caused by nozzle clogging.

When <LOCAL> is displayed, press the

key.

Select [NOZZLE CHECK] with the or

key , and press the key.

• Select [HARDEN CHECK] to confirm whether the UV ink is cured or not.

( P.3-4)

Test drawing starts.

• The machine scans for UV irradiation to cure ink on

the drawn pattern. ( P.3-23)

• When the following message is displayed, it cannot print. Start drawing after the message has

disappeared.

“WATER NOT READY” ：The water temperature in the water heating device has not

reached the predetermined value.

Check before starting

test drawing

• Is media set ?

( P.2-10)

• Is the origin position set ?

(P.2-28)

TEST DRAW

NOZZ L E CHECK <ENT >

ENTER

** TEST DRAW **