Specifications
2-21
Setting media
2
Basic Operations
7
Set the rigid media.
• Remove the rigid media retainer from the front sup-
port table.
• From the back of this machine, insert the media
between the pinch rollers and the platen.
• For the long media, pull out the auxiliary bars of the
support table, and set the media on them.
8
Adjust the media position at the front of
this machine.
( 1 ) Pull out the media from the front of this
machine.
( 2 ) Align the top of the media with the front line of
the platen.
( 3 ) Align the right edge with a guide line on the
machine.
• Set the media not to get out of the right end pinch roller.
• Remove the media retainer from the media.
• For the long media, pull out the auxiliary bars of the support table.
The front line of
the platen
Guide
The front