Specifications

2-17
Setting media
2
Basic Operations
4
Turn the clamp lever to the back.
• Set the media straight.
5
Select “LEAF” with the key.
6
Media detection starts.
( 1 ) The media width is detected.
( 2 ) The media is fed and the rear end of the media is detected.
( 3 ) When the detection is completed, <LOCAL> is displayed.
7
Adjust the head height.
• Adjust the head height according to the media thickness. ( P.2-24)
• When a space between the media and the head is wide, a
screen shown on the right is displayed and the media cannot
be detected.
In this case, lower the head height. ( P.2-24)
• Set media on the left by 55mm or more from the side plate on the right.
• If a media is on the right more than fixed position, a warning
is displayed. Set the media again.
MED I A SE L ECT
ROL L < > L EAF
DETECT I NG WI DTH
PLEASE WA I T
ERROR 50
WI DTH
MED I A POS I T I ON
Media retainer
Side plate (right)
Media