Specifications

2-11
Setting media
2
Basic Operations
5
Insert the roll media into this machine.
• Slanted the media, the roll media can be smoothly inserted.
( 1 ) Pull the media out to the top of the platen.
( 2 ) Insert the media between the platen and the pinch roller.
• Pull the media out until the media can be grabbed from the front of this machine.
( 3 ) Push down the clamp lever on the back of this machine.
• The media is fixed.
6
Fix the roll stopper from the front of
this machine.
( 1 ) In front lower right of this machine, push the roll
stopper arm to the end.
( 2 ) With the roll stopper arm pushed, push the roll
stopper pin from the right, and then release the
roll stopper arm.
• The roll stopper arm is fixed.
7
Pull out the roll media.
( 1 ) Turn the side clamp lever to the front.
( 2 ) Pull out the roll media gently, then stop pulling
when locked.
• By fixing the roll stopper, you can pull out the media evenly.
Pinch roller
Roll stopper arm
Roll stopper
1
2
Roll stopper pin