Specifications

2-8
Preventing nozzle missing while power-off
Even while the power switch is off, the machine starts periodically and executes various functions to prevent
nozzle missing. (Supported from the firmware ver.1.90)
1
When you start up the machine from
the sleep mode, the sleep operation is
performed, and the power switch is
turned off automatically.
• The sleep operation is completed in about 30 min.
• After “POWER OFF PLEASE WAIT” was displayed,
the power switch is turned off automatically.
When turning the power OFF
● Do not turn the main power switch OFF.
If the main power switch is ON, the power periodically turns on and the nozzle missing prevention function
is operated.
If the main power switch is OFF, the sleep function does not work and this may cause nozzle missing.
● Turn the power OFF after confirming the head position.
Turning the power off when the head does not return to the position in readiness (the left side) may dry the
head and may cause nozzle clogging.
In this case, turn the power ON again, confirm that the head has returned to the position in readiness (the
left side), then turn the power OFF.
● Do not turn the power OFF in drawing.
The head may not return to the position in readiness (the left side).
● Before turning the main power OFF, turn the front power switch OFF.
When turning the main power switch off to move this machine or to solve an error, be sure to press the
power switch on the front, confirm that the power is off, then turn the main power switch OFF.
• Do not turn off the power switch at startup from the sleep mode. When the sleep operation has
been completed, the machine turns off the power switch automatically.
• Cleaning is not performed.
• Ink has not been consumed.
• Until two hours have passed after the power switch was turned off, the machine starts every
10 min.
When two hours or more have passed after the power switch was turned off, the machine
starts every one hour.
UJV- 160 s t a r t - up
ver . * . **
PLEASE WA I T
POWER OFF
PLEASE WA I T