Specifications

1-7
Configuration and Function
1
Before Use
Operation Panel
The operation panel is used for each operation.
Jog Keys
The Jog key function differs from the timing as follows.
When setting a drawing
origin /area
When selecting the function When selecting the setting
Moves the carriage to the left
Moves the carriage to the right
Moves the media to back Returns to the previous function Selects the previous function
Moves the media to front Moves to the next function Selects the next value
Jog key
Use to move the head or the media in
[LOCAL] or to select an item of printing
conditions.
key
Displays function setting menu.
key
Cancels the last input value or returns to the last
menu.
FUNCTION
END
Display
Displays the status of this
machine, set items and errors.
ACTIVE lamp
Blinks in receiving or drawing data.
key
Switches [REMOTE] and [LOCAL].
key
Moves to the next menu or sets the inputs.
REMOTE
ENTER
key
Use this key for the station
maintenance.
key
Draws test patterns to check if
there are any drawing failures such
as ink clogging.
key
Sets the temperature of the print
heater and the pre-heater. The cur-
rent temperature of the platen can
be checked.
ST.MAINTE
HEATER
key
Selects User type.
key
Executes Head cleaning at ink
clogging.
key
Deletes the data that have been
received.
USER TYPE
CLEANING
DATA CLEAR
UV READY lamp
Shows the irradiation condition of
the UV LED on both sides. Lights in
green when the UV LED is irradiat-
ing.
UV ERROR lamp
Shows the error status of the UV
LED on both sides. Lights in red
when an error has occured.
CONSTANT lamp
Lights in green when the heater
reaches the set temperature.
HEAT lamp
Lights in orange during heating up
of the heater.