Specifications

Check first when a trouble occurred

5-3

In Case of Trouble

Problems of drawing result

If the drawing result has a problem, follow the table below. If the problem does not improve after that, con-

tact a distributor in your district or our office.

Nozzle clogging

If nozzle clogging is not solved after the head cleaning of P.2-34, check the following 2 items.

Execute subtank maintenance with the operation of P.4-21.

Replace ink with the operation of P.4-5.

Problem Solution

Lines / blur (1)Execute the head cleaning. ( P.2-34)

(2)If there is slips of paper in the head path, remove them.

Large ink droplet on media (1)Execute the head cleaning. ( P.2-34)

(2)Remove the dust of the media.

(3)Clean dust on the platen.

(4)Clean the bottom of the carriage. ( P.4-10)

Media is raised during drawing and the

drawing stops.

(1)Set new media and start printing.