Specifications

5-2
Check first when a trouble occurred
When a trouble occurred, check the followings. If the trouble is not solved after checking, contact a distribu-
tor in your district or our office.
The power is not turned on
It causes for improper connection of the power cable or the computer cable. Check that the cables are
properly connected.
Data is not drawn
It occurs when the data is not sent to this machine properly.
Message appears
When [T.NOT READY] appears on the display, the water temperature in the water heating device has not
reached the predetermined value.
Is the power cable connected to this
machine and to the outlet?
Securely connect the power cable to them.
Is the correct interface cable used? Use the cable exclusive for this machine.
Is the interface cable securely connected
in position?
Securely connect the interface cable in
position.
Yes
Is the message of the ink run-out shown
on the display?
Replace the ink cartridge with a new one.
P. 4- 5
[T.NOT READY] is displayed.
Wait until the temperature reaches the
predetermined value. When it has
reached, the message disappears and
drawing becomes available.
No
No
No
Yes
No