Specifications

4-10
Avoiding ink dripping at printing
Ink droplets from the mist at drawing may arise on the bottom of the carriage. As the ink droplets may drip
and stain the media or cause blur or dot missing, clean the bottom of the carriage periodically.
1
Turn the power on.
• After initializing, <LOCAL> is displayed.
2
Remove the cover and the waste ink tray.
• See P.4-12 "When the waste ink tray is full".
3
When <LOCAL> is displayed, press the
key.
4
Select the [MAINTENANCE] with the
key, and press the
key.
5
Select the [ST.MAINTENANCE] with the
key, and press the
key.
6
Press the key.
• The carriage automatically moves from the waiting
position (the left side) to near the waste ink tray on
the right.
• After moving, move the carriage manually.
7
Manually move the carriage onto the waste ink tray on the right.
Tools
• UJ Cleaning swab (SPC-0386) • Gloves • Goggles
• Phillips screwdriver
• When discharging ink for the head cleaning, wait until the discharging is finished, and work.
• Handle the waste ink tray with care not to spill the waste ink in it.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE <ENT >
ENTER
MA I NTENANCE
ST .MA INTENANCE <en t >
ENTER
ST .MA INTENANCE
CARR I AGE OUT <en t >
ENTER