Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
2-9
Turning the power ON/OFF
2
Basic Operations
Preventing nozzle dropout while power-off
Even while the power switch is off, the machine starts periodically and executes various functions to prevent
nozzle dropout. (Supported from the firmware ver.1.70)
1
When you start up the machine from
the sleep mode, the sleep operation is
performed, and the power switch is
turned off automatically.
• The sleep operation is completed in about 30 min.
• After “POWER OFF PLEASE WAIT” was displayed,
the power switch is turned off automatically.
2
Perform the cleaning and the flushing
when [SLEEP MAINTE.] (
P.4-19)
is
selected.
• When finishing the maintenance, the power is
turned off automatically.
• Do not turn off the power switch at startup from the sleep mode. When the sleep operation has
been completed, the machine turns off the power switch automatically.
• Until two hours have passed after the power switch was turned off, the machine starts every
10 min.
When two hours or more have passed after the power switch was turned off, the machine
starts every one hour.
•
Perform the cleaning and the refreshing according to settings. (P.4-19)
UJF - 706 s t a r t - up
ver . * . * *
PLEASE WA I T
POWER OFF
PLEASE WA I T
UJF - 706 s t a r t - up
ver . * . * *
SLEEP MA INTE
PLEASE WA I T
POWER OFF
PLEASE WA I T