Specifications

2-7
Turning the power ON/OFF
2
Basic Operations
If ink in subtank is not enough
1
Fill ink into the subtank.
• When the filling is completed, <LOCAL> is displayed.
If hot water temperature in water heating system is difficult to rise
For a cold day or when antifreeze in the water heating system has decreased, the hot water temperature
may be more difficult to rise than usual.
Even if a certain amount of time has passed, the hot water
temperature does not reach a certain temperature, a message is
displayed on the screen.
When you select “CONTINUE”, the system will wait until the hot
water temperature reaches a certain temperature.
When you select “END”, the status becomes available for drawing.
• If you perform drawing with the hot water temperature not reaching a certain temperature, the
image quality may be degraded.
• When the message above is displayed, it is possible that antifreeze becomes less. Refill it.
(P.4-28)
SUPPLY I NG I NK
*****---------------
WA T E R T EMP NO T R E A D Y
CONT I NUE < > END