Specifications

1-16
About Media
The sizes of media that can be used and the method of handling are described here.
Usable media size
Caution when handling the media
Carefully observe the followings to avoid a break of this machine or inferior printing.
Maximum width
710 mm
Minimum width
210 mm
Maximum print length
700 mm
Thickness
0.2mm to 150 mm
Roll media
*1
(Option)
*2
*1: For the roll media thickness, 0.025 mm thick or more can be used (use stretched media).
*2: For this machine, we provide an optional unit to use roll type media (roll media feeding/take-up machine).
For details, contact a distributor in your district or out office.
Outside diameter
φ250 mm or less
Weight
25kg or less
Caliber of the core
2 inches or 3 inches
Print face
Outer surface of the roll media
End of the roll media
Attach with a tape or a weak adhesive on the core
• Expansion and contraction of the media
Do not use sheet types of media immediately after unpacking.
The media can expand and contract due to room temperature and humidity.
The media have to e left in the atmosphere in which they are to be used for 30 minutes or
more after unpacked.
• Absorption of media
In order to fix the media, block the absorption holes on the table, which can not be covered
with media, with other media thinner than those to be used.
• Other notes
a Do not put anything on coated media. Some coated media may fox.
b Curled media not wholly absorbed or those that go out of alignment during table movement cannot
be used. They may be made available when they are fixed on the table with adhesive tape, etc.