Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
4-40
Checking method of UV illumination intensity
UV lamp is a consumable. The more the irradiation time increases, the more the amount of light decreases
and the ink will become hard to harden. When the cumulative irradiation time exceeds a certain value, a
message prompting you for checking the illumination intensity is displayed on the operation panel.
Check the UV lamp illumination intensity following this operation
manual and use it as a reference when replacing the UV lamp.
Notes when checking the illumination intensity
Notes when checking the illumination intensity
The OPT-J0288 Illumination intensity measuring kit (with illumination meter), or the OPT-J0289 Illumination
intensity measuring kit (without illumination meter) if you have the handy type illumination meter for the
UJF-605C is required.
• Be sure to wear the attached goggle and the gloves.
• Wear long sleeves in order to protect your skin from the UV lamp.
!UV LAMP
LAMP CHANGE