Specifications

4-16
Setting nozzle face cleaning time
When set times of drawing are completed, nozzle face of the head is cleaned automatically to remove ink
droplets on the nozzle face.
1
When <LOCAL> is displayed, press the
key.
2
Select the [MAINTENANCE] with the
key, and press the
key.
3
Select the [INT. MAINTENANCE] with
the key, and press the
key.
4
Select the [PRINT END] with the
key, and press the key.
5
Select maintenance interval with the
key, and press the
key.
• Setting value: SCAN CNT, PRINT CNT
6
Set the number of times with the
key, and press the key.
• Setting value
SCAN CNT: 200 to 1000 (In 100 unit)
PRINT CNT: 1 to 4
7
Select wiping or not for each head, and
press the key.
(1) Select the head with the key.
(2) Select maintenance or not (“*” marked) with the key.
8
Set the maintenance method with the
key, and press the
key.
• Setting value: WIPING, CLEANING
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NT ENANCE < ENT >
ENTER
MA I NT ENANCE
INT.MAINTENANCE<ent>
ENTER
INT.MAINTENANCE
PR I NT END < e n t >
ENTER
PR I NT END
INTERVAL :SCAN CNT
ENTER
PR I NT END
SCAN COUNT : 200
ENTER
PR I NT END
SELECT : 12345678abcd
ENTER
PR I NT END
SELECT : WI P I NG
ENTER