Specifications
Table Of Contents
- TABLE OF CONTENTS
- CAUTION
- Foreword
- For safe operation
- How to Read This Operation Manual
- CHAPTER 1 Before Use
- CHAPTER 2 Basic Operations
- CHAPTER 3 Useful Function
- Changing origin
- Adjusting head gap
- When nozzles missing can not be improved
- Setting the print condition in a set
- Setting the print condition
- Setting media compensation
- Setting the print method
- Registering head gap value
- Set the scan width of the head
- Changing the UV illumination intensity
- Sets UV irradiation at starting/ ending of drawing
- Setting the priority
- Sets the cooling time per scan
- Initializing the settings
- Turning OFF the UV lamp
- Setting the UV lamp OFF duration
- Changing the UV illumination intensity
- MACHINE SETUP
- Other useful functions
- CHAPTER 4 How to care
- Maintaining
- Ink cartridge
- Washing cartridge
- Cleaning the flushing box
- Avoiding ink dripping at printing
- When the waste ink tray is full
- Setting nozzle face cleaning time
- Perform cleaning automatically when the power supply is turned on
- Preventing nozzle dropout while power-off
- Regular maintenance of white ink
- If blur or missing remains
- Wiper cleaning
- Refill antifreeze liquid
- Cleaning of the UV lamp filter
- Cleaning of the UV power supply filter
- Cleaning of the optional vacuum unit filter
- Replacing the mist fan filter
- Replacing UV lamp
- Checking method of UV illumination intensity
- Cleaning of the Ionizer
- Prevent the nozzle clogging of spot color
- CHAPTER 5 In Case of Trouble
- CHAPTER 6 Appendix
Avoiding ink dripping at printing
4-11
4
How to care
5
Remove the flushing box cover
.
• Lift it up to remove.
6
Bring down the flushing BOX.
(1) Lift it up slightly.
(2) Push it into the rear side.
(3) Bring it down.
7
Move the carriage to the flushing position manually.
8
Dip the cleaning swab into the cleaning
solution, and clean the side surface of
the head.
• Do not wipe the nozzle face of the head. It may
cause nozzle clogging.
• To buy special cleaning swabs, contact a
distributor in your district or our office.
• If ink adheres to the bottom surface of the
carriage, wipe it off completely.
9
Set the covers and the tray removed at Step 3, 4 and 5.
10
Turn the power on.
Fluxhing BOX cover
Bottom of the carriage