Specifications

4-24
When the Machine Is Not Used for a Long Time (CUSTODY WASH)
When the machine is not going to be used for a week or more, use the cleaning function for custody to clean the
head nozzles and ink discharge passage. After this, keep the machine in custody.
1
Press the key in the local mode.
2
Select the [MAINTENANCE] by pressing the or
key, and press the key.
3
Select the [STATION] by pressing the or
key, and press the key.
4
Select the [MENT:CUSTODY WASH] by pressing the
or key, and press the key.
• The carriage moves to the left, and the Y-bar moves to the front.
• The wiper moves to the front.
5
Remove the front cover.
(1) Push the both ends of the front cover.
(2) Pull the cover to the front while opening upward.
6
Dip washing liquid into the cleaning swab, and wipe
dirt of the wiper nozzle.
• Wipe the places shown in the right.
• Put on supplied goggles and gloves.
Tools
• UJ Cleaning swab (SPC-0386) • Gloves • Goggles
• F-200 / LF-200 Washing Liquid (SPC-0568)
<LOCAL>
FUNCTION
FUNCT I ON
MA I NT ENANCE < ENT >
ENTER
MA I NT ENANCE
STAT I ON <en t >
ENTER
STAT I ON
MENT : CUSTODY WA SH
ENTER
Front
Back