Specifications

4-5
Ink cartridge
4
Maintenance
Setting the ink set
Set the ink set when ink type is changed. Contact a distributor in your district or our office to call for service.
When you replace another kind of ink, wash all heads.
For replacement between the same inks, the process (washing and filling) flow is as below:
1
Press the key in the local mode.
2
Select the [MAINTENANCE] by pressing the or
key, and press the key.
3
Select the [INK SET] by pressing the or
key, and press the key.
4
Select the ink set by pressing the or key,
and press the key.
• Select from the following sets of ink.
MCYKW
C
L
/ MCYKWW / MCYK
C
L
C
L
/ MCYK_ _
• When the ink set is changed, go to the next step.
Ink set before replacement Ink set after replacement Procedure
MCYKW
C
L
MCYK_ _ Third head washing only
MCYKWW
MCYK
C
L
C
L
MCYKW
C
L
MCYKWW Third head fill up after washing
MCYK
C
L
C
L
MCYKWW MCYKW
C
L
MCYK
C
L
C
L
MCYK
C
L
C
L
MCYKW
C
L
MCYKWW
MCYK_ _ MCYKW
C
L
Third head filling only
MCYKWW
MCYK
C
L
C
L
<LOCAL>
FUNCTION
FUNCT I ON
MA I NT ENANCE < ENT >
ENTER
MA I NT ENANCE
INK SET <ent>
ENTER
INK SET [LH-100]
SELECT : MCYKW
C
L
ENTER