Specifications

2-8
Drawing an image from source data
Starting the drawing operation
1
Set the media. ( P.2-4)
(1) Press the key to absorb the media.
2
Press the key in the local mode.
• The machine goes in the remote mode and data from the
computer can be received.
• The table height is displayed.
3
Transmit data to be drawn from the computer.
• Drawing conditions are displayed.
• As for the data transmission method, see the instruction manual
of the output software.
4
Start drawing.
• The drawing origin is not changed after completion of the drawing.
5
Taking out the media after completion of drawing.
(1) Press the key to turn the adsorption OFF.
(2) Remove the media.
• If the temperature of the head has not reached the predetermined value, a message is displayed.
Drawing is not allowed in such cases. When the display is disappeared, drawing can be started.
• Data transmission is allowed even if errors are displayed. Drawing is started after the display is
disappeared.
• This machine does not have “H” (double speed)
and “B” (bi-directional).
• During printing, media may be heated by the LED UV and raised, causing drawing to be interrupted. In
this case, set new media and restart drawing.
VACUUM
*REMOTE*
49 . 0mm
REMOTE
*REMOTE* 720X600
HOST/16/U/N 49.0mm
Resolution: 720x600DPI
Pass
Priority is set to “HOST” :
“HOST” is displayed.
Priority is set to “PLOT” :
Print quality (STD/FINE/FAST) is
displayed.
Direction:
“B” denotes bi-directional.
“U” denotes uni-directional.
Scanning speed:
“N” denotes normal.
“H” denotes the
double speed.
Table height
VACUUM