Specifications

5-4
Troubles for which error messages are given on the LCD
If something is wrong with the machine, the buzzer sounds and a corresponding error message is given on
the LCD. Take an appropriate corrective measure in accordance with the message.
Warning Message
Message Solution
• Attach the ink cartridge(s) shown on the display. ( P.4-4)
• Replace the ink cartridge shown on the display as soon as possible.
( P.4-4)
• Replace the ink cartridge shown on the display. ( P.4-4)
• The ink has expired. Replace the ink cartridge shown on the display with
a new one. ( P.4-4)
• Check the type of the loaded ink cartridge is correct.
• Check the color shown on the display and the color of the loaded ink car-
tridge are the same.
• Use the MIMAKI ink.
• Insert the ink cartridge shown on the display again. If the error is still dis-
played after this, call a distributor in your district or our office.
• An obstacle was detected. Lower the table so that this warning disap-
pears. ( P.3-4)
• Check the amount of water in the cooling water tank, and fill as needed.
( P.4-34)
• Execute the station maintenance and dispose of the ink in the waste ink
tank. ( P.4-14)
• Execute the station maintenance and dispose of the ink in the wiper bot-
tle. ( P.4-16)
• Execute the station maintenance and clean the wiper. ( P.4-32)
• Execute the station maintenance and replace the filter. ( P.4-18)
• Execute the carriage out of the station maintenance, and clean the cap.
• A case weight of 600 ml cartridge is not set. Set the case weight on “600
ml CARTRIDGE” of “MACHINE SET”.
• Enter weight of the cartridge on “CART WEIGHT” of “SET UP”.
<LOCAL>
NO CARTR I DGE
<LOCAL>
INK NEAR END
<LOCAL>
INK END
<LOCAL>
Exp i r a t i on
<LOCAL>
INK TYPE
<LOCAL>
Co l o r o f I NK
<LOCAL>
NON - OR I G I NA L
<LOCAL>
WR O N G I N K I C
<LOCAL>
!WORK Hi gh
<LOCAL>
WA T E R L A C K
<LOCAL>
! WS I NKTANK CHK
<LOCAL>
WI PER BOTTLE
<LOCAL>
!REPLACE WIPER
<LOCAL>
!CHECK FILTER
<LOCAL>
CAP CLEAN I NG
<LOCAL>
Case We i g h t
<LOCAL>
INK LVL LOW