Instruction manual

- 3.11 -
Improving the density of ink color [INK LAYERS]
This function prints the data in two or more layers (wet-on-wet coating) to improve the density
of ink color.
If a coarse-surfaced fabric (e.g., canvas) is used, the color of ink might be weak. In this case,
execute this function (wet-on-wet coating).
• When using a cloths with high moisture-elasticity, do not use the function
[INK LAYERS]. The printing quality may be reduced because of expansion
and contraction of the cloth, or the head may catch the cloth to press it to a
position resulting in cloth jam.
STEPS:
1. Select a type. (see page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [
] and [ ] to select
[INK LAYERS].
4. Press the [ENTER] key.
5. Press the JOG keys [
] and [ ] to select the
number of ink layers.
A number 1 to 9 can be selected as the number of times of
reprinting.
Here, select [3] times.
6. Press the [ENTER] key.
7. Press the [END] key twice.
The menu returns to the LOCAL mode.
SETUP
SELECT :
TY PE . 1
TYPE1
MED I A COMP. <ent>
TYPE1
INK LAYERS<ent >
TYPE1
INK LAYERS = 1
TYPE1
INK LAYERS = 3
TYPE1
INK LAYERS<ent >
<< LOCA L> >
width:1272mm