Instruction manual

- 3.8 -
Setting printing conditions
Changing printing conditions on the printer side
Set up the printing method that determines the quality of image.
For the printing method, there are three setting items - “quality of image”, “direction of print-
ing” and “Returning speed of the head.”
Relationship between image quality and printing speed [QUALITY]
For the quality of image, there are three setting items - [STD], [FINE], and [HIGHspd].
[STD] (Standard) : Standard image quality
[FINE] : High image quality and low printing speed
[HIGHspd] (High speed) : High printing speed and slightly inferior image quality
STEPS:
1. Select a type. (see page 3.3).
Here, select Type 1.
2. Press the [ENTER] key.
3. Press the JOG keys [
] and [ ] to select [PRINT
MODE].
4. Press the [ENTER] key.
5. Press the [ENTER] key.
6. Press the JOG keys [
] and [ ] to select the quality.
There are three quality types from which you can select one.
[STD], [FINE], [HIGHspd.]
7. Press the [ENTER] key.
8. Press the [END] key three times.
The menu returns to the LOCAL mode.
SETUP
SELECT :
TY PE . 1
T YPE1
MED I A COMP. <ent >
T YPE1
PR I NT MODE<ent >
T YPE1 MODE
QUA L I TY :
STD
T YPE1 MODE
QUA L I TY :
FINE
TYPE. 1 MODE
QUALITY < ent >
<< LOCA L> >
width:1272mm
T YPE1 MODE
QUA L I TY<ent >