Instruction manual

- 3.5 -
Adjusting the lapal bar
Diverse types of media are used for inkjet printers: different raw materials including natural
materials, synthesized materials, etc. and materials with different manufacturing processes
including textile fabric, knit fabric, etc. In addition, even for the same medium, the elasticity
characteristic changes according to the difference in pre-treatment, etc. To perform printing
on diverse types of media with appropriate tension which best suits each medium, it is neces-
sary to adjust the mount position of the lapel bar and the number of bars mounted.
CHANGING THE WINDING ANGLE OF THE LAPEL BAR >
High-tension media setting Low-tension media setting
CHANGING THE WINDING ANGLE OF THE LAPEL BAR >
Media set 1 Media set 2
Larger contact angle
increases the tension.
Smaller contact angle
decreases the tension.
Effective to increase
the contact angle.
[1]Set a lapel bar.
[2]Set the medium.
[3]Set two lapel bars.
[1]Set two lapel bars.
[2]Set the medium.
[3]Set a lapel bar.
[1]
[1]
[1]
[2]
[2]
[3]
[3]
[3]