Instruction manual

- 3.2 -
[FUNCTION]
DISPLAY
[FUNCTION]
MAINTENANCE
[FUNCTION]
SET UP
Application functions
The application functions make it possible to modify the printing conditions that have been set
for source data received from the computer. The [FUNCTION] key is used to set up the
application functions.
Function menu
Of the menus that are provided for setting printing conditions for the printer, the menu for
setting up the printer functions is called the function menu. In order to set printing conditions
properly, it is necessary to understand the structure and operation of the function menu.
The function menu consists of three major items: [SETUP], [MAINTENANCE], and [DISPLAY].
In this chapter, [SETUP] and [DISPLAY] of the function menu are explained. (For “Mainte-
nance” of the function menu, see Chapter 4 “Maintenance functions.”)
[SETUP]/[DISPLAY]
The table, below, shows the tree structure of the function menu.
In order to use the application functions of the printer, it is necessary to understand the proper
sequence of key operations.
In setup of the function menu, allocate printing methods to be set to types 1 to 4 before
detailed setting of the individual printing conditions so that you can use the printing conditions
registered by type.
TYPE1 to 4 MEDIA COMP. -500 to 500
PRINT MODE QUALITY STANDARD, FINE, HIGHspd
DIRECTION UNI-D, BI-D
RET. SPD UP ON, OFF
INK LAYERS 1 to 9
DRYING TIME EACH LINE : 0.1s to 9.9s
AUTO CUT OFF , ON
PRIORITY PLOT MODE : HOST , PLOT INK LAYERS : HOST , PLOT
DRYING TIME : HOST , PLOT INK TYPE : HOST , PLOT
REFRESH : HOST , PLOT MEDIA COMP. : HOST , PLOT
MARGIN RIGHTmargin -9 to 95mm
LEFTmargin -9 to 95mm
REFRESH LEVEL: 0 to 3
MM/INCH INCH , MM
INK TYPE Acid, Disp, Reac (Displayed at the time of setting for 2-way multiprinting.)
AUTO CLEANING OFF , ON
AUTO CLEANING2 OFF , ON normal, soft, strong 0.1 to 10m
PRINT CONT. OFF , ON (Displayed at the time of setting for 1-way high-speed printing.)
EndOf PRINT BACKFEED OFF , ON 1 to 60mm
CENTERING OFF , ON
TAKE-UP OFF , ON, INTERVAL,
SETUP RESET RESET
See Chapter 4 "Maintenance Functions".
ENGLISH, JAPANESE, PORTUGUESE, ITALIANO, ESPANOL, FRANCAIS, DEUTSCH