Instruction manual

- 3.1 -
Chapter 3
How to use the application functions
After you have mastered the operations described in Chapter 2 “How to
use the basic functions,” you should learn how to use the application
functions whereby you can set printing conditions on the printer side and
put the printer into operation.
By using the application functions, you can set printing conditions appro-
priate to data that is provided for the printing operation.
Table of contents
Application functions ............................................................................................ 3.2
Before setting printing conditions in the function menu ....................................... 3.3
Adjusting the lapal bar ......................................................................................... 3.5
After setting the fabric to be printed ..................................................................... 3.7
Setting printing conditions ................................................................................... 3.8
Improving the density of ink color [INK LAYERS] ............................................... 3.11
Setting the ink drying time [DRYING TIME] ....................................................... 3.12
Deciding the priority of settings by the computer or the plotter [PRIORITY] ..... 3.13
Increasing (decreasing) the right and left margins of the fabric
[RIGHTmargin]/[LEFTmargin] ............................................................................ 3.15
When using the plotter in an extremely dusty or dry place [REFRESH] ............ 3.17
Setting a unit of length displayed on the LCD [MM/INCH] ................................. 3.18
Setting the type of ink to be used [INK TYPE] ................................................... 3.19
Setting up auto-cleaning function [AUTO CLEAN] ............................................ 3.20
Setting up auto-cleaning function [AUTO CLEAN2] .......................................... 3.21
Setting of End of printing [EndOf PRINT] .......................................................... 3.23
Continuing printing after [Ink Near End] [PRINT CONT.] .................................. 3.24
Preventing the fabric skew [CENTERING] ....................................................... 3.25
Enabling the take-up unit [TAKE-UP]................................................................. 3.26
Resetting printing conditions by type [SETUP RESET] ..................................... 3.27