Instruction manual

- 2.14 -
Cleaning the wiper shaft
The dirty wiper shaft may cause the wiper malfunction and resulting an error display.
Maintenance for frame components
If the frame components of the device have stained, dampen a piece of soft cloth with water
or neutral detergent diluted with water, squeeze it and wipe the frame components clean.
Cleaning penetrated ink
When printing on a thin cloth, ink is collected in the ditch.
Make sure to wipe them with wasted cloth frequently. If ink is left in the ditch, ink leaks and
smadges floor or machine inside.
Place to wipe:
Frequeincy of wipe:
• When operation end each day, or when replacing the media.
• In the case of continuous printing, or using a loose weave fabric, ink is collected faster.
Therefore be sure to wipe when ink in the ditch go into liquid state.
• laying a waste cloth in the ditch makes cleaning easier.
Replace the cloth when certain amount of ink has been absorbed.
Ditch