Instruction manual

- 2.8 -
Information on printing data
Key operation on REMOTE mode
[REMOTE] key : In case pressing [REMOTE] key when the printing data has not received,
the mode is entered LOCAL mode.
In case pressing [REMOTE] key when the printing data has received and
printing has been performed, complete scan performance and the mode
is entered LOCAL mode. Printing is suspended. And then press [RE-
MOTE] key again, the mode is entered REMOTE mode and printing is
started again.
[ENTER] key : When pressing [ENTER] key during REMOTE mode, the guidance is
displayed.
[FUNCTION] key : When pressing [FUNCTION] key during REMOTE mode, the “Feed
Comp.” function is displayed.
• During the plotting performance is suspended, some function could not be
operated and the error will be displayed as follows:
In this case, complete plotting operation or execute “DATA CLEAR” operation.
<REMOTE> V360x360
A/ST /4P/ U/
**
.
*
m
<REMOTE> V360x360
T YPE 1+
**
.
*
m
Displaying
alternately
Correction value during printing
(+), (-)
Length of fabric that
has been plotted on
Type currently used
Print direction:
U : Unidirectional
B : Bidirectional
Dividing method:
2P, 3P, 4P, 8P, 12P, 16P
2H, 3H, 4H, 8H, 12H, 16H
QUALITY
ST: Standard
SP: High speed priority
FI: High quality priority
HT: When plot setting is
made on the computer
Head row
A: FRONT and REAR
F: FRONT
R: REAR
Resolution: 360/540/720 dpi
Print mode V: Varianle 1, 2
N: Normal 1, 2
ERROR 34
DA TA REMAIN