Instruction manual

- 1.41 -
Setting The FabricTo The Printer
The fabric that can be used are roll and leaf fabric.
Leaf fabric is handled in the same manner as roll fabric for printing.
When using leaf paper for setup list printing, for example, be careful about the setting posi-
tion.
Setting a roll fablic
The procedure for setting roll fabric is described below.
• The roll is heavy in weight. Take care not to drop it on your foot.
• When setting the fabric, be sure to check that the head height has been
properly adjusted.
STEP
1. Center the centering indicator.
Push the switch to the left and right so that the red indicator be
positioned around at the center of the slit.
(See page 1.45)
2. Insert the let-hand roll holder into the core of the
roll fabric.
Push roll fabric onto the roll holder till the roll core no longer
moves.
The inside diameter of the roll fabric core may be 1.35 inches,
2 inches and 3 inches.
Fit the roll fabric to the roll holder appropriate to the core inside
diameter.
CENTER
CENTERING POSITION
LEFT LIMITRIGHT LIMIT