Instruction manual

- 1.38 -
2. Push down the head height adjustment rod by
the right hand.
Push down the head height adjustment rod till
it stops moving anymore.
• If the tip of the head height adjustment rod
makes contact with the surface of the fabric,
repeat step 10.-1 shown on the preceding
page to raise the head.
3. Turn the head height adjustment screw in the
direction shown and move the head
downward.
With the head height adjustment rod kept
pushed, lower the head till the tip of the rod
makes contact with the surface of the fabric.
4. Retighten the support screw after completing
the head height adjustment.
11. Close the front cover.
Fabric
Tip of the head
height adjustment rod
HEAD HEI GHT
COMP LETED : en t