Instruction manual

- 1.37 -
2. Press the [FUNCTION] key.
3. Press the JOG keys[
] and [ ] to select [MAIN-
TENANCE].
4. Press the [ENTER] key.
5. Press the JOG keys[
] and [ ] to select [HEAD
HEIGHT].
6. Press the [ENTER] key.
• If the fabric is loaded, “REMOVE MEDIA” will
be displayed. In this case, remove the fabric.
7. Press the [ENTER] key.
The carriage will come out of the capping station.
8. Open the front cover and then set the fabric to
be used on the platen.
9. Move the carriage to a position where adjustment
is easy.
The carriage can be moved manually.
10. Adjust the head height.
1. Loosen the support screw (1), turn the height
adjustment screw (2) in the direction shown,
and move the head upward.
1
2
FUNCTI ON
MA I NTENANCE<ENT>
FUNCTI ON
SETUP <ENT>
MA I NTENANCE
LIST <ent >
MA I NTENANCE
HEAD HEIGHT <ent >
HEAD HEIGHT
CARRIAGEout : en t
HEAD HEI GHT
REMOVE MEDIA
HEAD HEI GHT
SET MEDI A