Instruction manual

- 1.34 -
Fabric for printing
This section describes the types of fabric that can be used with the printer and the method of
setting the media used.
Types of fablic that can be used
The types of fabric that can be used with this printer “Roll” and “Leaf” fabric are cut sheet media.
However, because leaf fabric is handled in the same manner as roll fabric, be careful about
the setting position of leaf fabric.
• When using the Leaf, the following functions are disabled.
[CENTERING]
[TAKE-UP]
Sizes of fabric that can be used
Maximum 1650 mm
Minimum 200 mm
printing width 1620 mm
Thickness 7.0 mmmm or less
Roll outside diameter Ø 180 mm or less
Roll weight 15 Kg or less
Roll inside diameter 3, 2, and 1.35 inches
Printing surface Faces OUT
Roll end treatment Light-adhesive tape is used to allow the paper to be
removed from the core with ease.
fabric