Instruction manual

- 1.27 -
Turning the power off
To turn the power off, check first whether or not there is data received and there remains data
that has not yet been output.
Also be sure that the head rests at the capping station.
• If the power is turned off while the printer is engaged in printing, the head
may fail to be retracted in the capping station. If the head is left without capped
for an extended period of time, the nozzle will be clogged with dust. If the
power to the printer is turned off without the head capped, re-turn on the
power to the printer.
STEPS:
1. Turn off the power to the computer, etc. that are
connected to the printer.
2. Turn off the power to the printer.
Tilt the power switch to the “O“ side.