Instruction manual

- 1.25 -
Connecting the power cable
Connect the power cable to the receptacle of the following specifications.
•Voltage : AC 100 - 240 V ±10%
• Frequency : 50/60 Hz ±1%
• Capacity : 5 A or more (500 W or more)
• Be sure to turn off the power switch of the printer in prior to the connection of
the power cable.
• Be sure to insert the power cable into an approriately-grounded receptacle.
If not, there is a fear of arising electric shock hazards and damage to the
printer.
STEPS:
1. Connect the power cable to the AC inlet.
Configuration of power cable
2. Connect the power cable to the 3-pole recep
tacle.
For a 2-pole receptacle, connect the ground-
ing adapter supplied with the printer to the
power cable plug. Properly ground the green
wire (ground lead) of the grounding adapter.