Instruction manual

- 1.14 -

Rear face

Name Function

1. F-row ink station This station houses up to eight ink cartridges.

2. Clamp lever It is made to go up-down the pinch roller for holding fabric.

3. Centering sensor unit This sensor detects the fabric edge and optical axis so that

the fabric be fed straight.

4. Loading unit Inserted into both ends of the fabric core to retain the roll

fabric.

5. Roll holder Applicable to roll paper with a thickness of 1.35, 2, or 3

inches.

6. Loading auxiliary bar This shaft supports the ran-out fabric while it is fed to the

platen.

7 Lapel bar The lapel bar is used to stabilize the medium tension of the

run-out side.

8. R-row ink station This station houses up to eight ink cartridges.

9. Ink cartridge Each cartridge contains ink of a specific color.