Instruction manual

- 1.8 -
6. Holding both ends of the main unit with four per-
sons.
Hold up the device at the pedestal support bars.
7. Place the main unit on the stands while exercis-
ing care not to allow hands to be caught between
them.
Set the device on the stand at the position where the screw
holes in the device align with the screw holes in the tops of the
stands.
Fix to the stands with the screws from under the stands tops.
• The device is very heavy. Take care that it
does not fall: it is very dangerous.
8. Set the take-up device stand stay in position.
Fasten the screw tightly which was once temporarily attached.
Attach the hole plug to cover up the screw.