Instruction manual

- xiv -
• Be sure to use the printer with the power supply specifications indicated. Be sure to
connect the plug of the power cable to a grounded receptacle. If not, fire or electric
shocks can result.
•Take care not to damage, break or work on the power cable.
If a heavy matter is placed on the power cable, heated or drawn, the power cable can
break to cause fire or electric shocks.
• Avoid damp environments when putting the printer into service. Do not splash water
onto the printer. High-humidity or water will give rise to fire, electric shocks or
breakdown of the printer.
• If the printer is used under an abnormal condition where the printer produces smoke
or unpleasant smell, fire or electric shocks can result. Be sure to turn off the power
switch immediately and detach the plug from the receptacle. Check first to be sure
that the printer no longer produces smoke, and contact a distributor in your district for
repair.
Never repair your printer by yourself since it is very dangerous for you to do so.
• Never disassemble or remodel the main unit of the printer and the ink cartridge.
Disassembling/remodeling any of them will result in electric shocks or breakdown of
the printer.
• Store ink cartridges and waste ink tank in a place that is out of the reach of children.
For safe operation
Precautions in use
CAUTION
Warnings in use
WARNING
• Roll fabric is heavy. Be careful not to drop it. If you drop it on your foot, or any other
part of your body, personal injury can result.
• The ink is not toxic, however, avoid direct contact with the ink. If ink settles on the skin
or fabrics, immediately wash it off with detergent or water. In the event that ink gets in
eyes, immediately rinse it off with water and consult a medical doctor.