Instruction manual

- xiii -
Structure of this Manual
Foreword
This foreward describes the notice before operation and how to read this
Operation Manual.
Chapter 1 Setup
This chapter describes the procedures for unpacking and assembling the
printer, and for setting up the printer such as setting inks and fabric.
Chapter 2 How to use the basic functions
This chapter describes the basic operations of the printer, from the
beginning to the end of printing.
In order to use the application functions, it is indispensable to understand
the basic functions of the printer explained in this chapter.
Chapter 3 How to use the application functions
This chapter describes the application functions of the printer, such as the
function menu for setting printing conditions.
Chapter 4 Maintenance functions
This chapter describes functions intended to correct adverse influences on
picture quality and to check abnormal conditions as well as the procedure to
be taken to replace a used ink tank, wiper and so on.
Chapter 5 When abnormal conditions are encountered
This chapter describes how to correct troubles after the occurrence of an
abnormal condition on the printer.
Appendix
This appendix describes the specifications of the printer, function menu
structure and output samples and introduces separately-available
consumables.