Instruction manual

- 4.31 -
STEPS:
1. Select [STRECTH CHK] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
3. Press the JOG keys [
] and [ ] to select the density.
[50%], [100%], [200%], [300%]
• 200 % of density is recommended for check-
ing the stretch and shrink on printing at reso-
lution 720 dpi.
4. Press the [ENTER] key.
5. Press the JOG keys [
] and [ ] to select the pass.
[4], [8]
6. Press the [ENTER] key.
7. Press the JOG keys [
] and [ ] to select the color.
[1A], [2B], [3C], [4D], [5E], [6F], [7G], [8H]
8. Press the [ENTER] key.
Start printing the check pattern.
Screen will return to the color selection screen at the end of
printing.
9. Press the [END] key four times.
The menu returns to the LOCAL mode.
MA I NTENANCE
STRETCH CHK<ent>
STRETCHCHECK
PATTERN :100%
STRETCHCHECK
PATTERN :200%
STRETCHCHECK
PASS :4
STRETCHCHECK
PASS :8
STRETCHCHECK
COLOR : 1A
STRETCHCHECK
COLOR : 2B
STRETCHCHECK
COLOR : 2B
PR I NT I NG
PLEASE WAI T
<< LOCA L> >
width:1272mm