Instruction manual

- 4.30 -
Check the stretch and shrink of fabric after the printing [STRETCH CHK]
Check whether the cloth is stretching or shrinking after the printing.
The check pattern will be printed at resolution 360 dpi.
Stretch check method
The printing goes as the following order;
cruciform ---> fill pattern ---> square mark
The stretch condition of the cloth can be verified by the gap between the cruciform and the
square mark.
When the cloth is stretched
The square mark will approach the fill pattern.
When the cloth is shrunk
The square mark will move to the outside.
500 mm
Cruciform
Fill pattern
Square mark
Output direction