Instruction manual

- 4.27 -
8. Take out the changing ink cartridge from the ink
station.
When removing the ink cartridge, “-” is displayed on LCD.
When all the ink cartridges are taken out, the discharge of ink
is started automatically.
9. When the LCD shown on the right appears,
install the washing liquid cartridge.
When all the washing liquid cartridges are installed, washing is
started automatically.
10. When the LCD shown on the righti appears, take
out the washing liquid cartridge from the ink
station.
When all the washing liquid cartridges are taken out, discharge
of the washing liquid is started.
11.Repeat steps 9 and 10.
12. Check the type and number of ink set.
In case changing the type or number, see the STEPS 2-5.
13. Press the [ENTER] key.
14. Insert the ink cartridges to the ink stations.
Align two projecting portion of the ink cartridge with rails on the
ink stations. Once the ink cartridge is inseted to reach the nor-
mal position, the number of the ink station is displayed on the
LCD.
The LCD shown on the right will be displayed when all the car-
tridges are inserted normally.
WA S H
SET CLEAN TOOL
WASH I NG
PLEASE WAI T
WA S H
REMOVE TOOL
WA S H
- -------ABCDEFGH
WASH I NG
PLEASE WAI T
WA S H
- -------ABCDEFGH
WA S H
- -------ABCDEFGH
WASH I NG
PLEASE WAI T
InkSet R:Re a c
F:Ac i d
Ink Cart r idge
- -------ABCDEFGH
R:R e a c F :A c i d
- -------ABCDEFGH
FILL UP INK
STAR T : en t