Instruction manual

- xii -
Safety symbols used in this Manual
Safety signal words
Pictorial signs are used in this Operation Manual for safe operation of and in prevention of
damages to the printer. Pictorial signs and their meanings are given below. Read and fully
understand before reading the text.
•WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serioous injury.
• CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
• CAUTION used without the safety alert symbol indicates a potentially haz-
ardous situation which, if not avoided, may result in property damage.
• NOTE indicates notice which is not applied above three symbols.
• The symbol " " indicates helpful information that will facilitate the use of
the unit.
• The symbol " " indicates the case where some phenomenon that requires
a CAUTION sign (including "DANGER" and "WARNING" signs) exists. A
concrete precaution (precaution against an electric shock in the case of the
sketch given on the left) is shown in the illustration.
• The symbol " " indicates a prohibited behavior. A concrete illustration of
prohibition (disassembly is prohibited in the sketch given on the left) is shown
in or next to the illustration.
• The symbol " " indicates a thing that is forced to be done and instruction
that is forced to be followed. A concrete illustration of instruction (the
removal of a plug from the receptacle is instructed in the sketch given on
the left) is drawn in the illustration.