Instruction manual

- 4.21 -
12. Close the maintenance cover.
13. Press the [ENTER] key.
14. Press the JOG keys [
] and [ ] to select the time
to leave. (1-99 minutes: 1 min unit)
Normally set 1 min.
15. Press the [ENTER] key.
The initial operation is performed.
Remaining time is displayed.
After remaining time is over, execute cleaning.
Remaining cleaning time is displayed.
After cleaning the nozzles, the Y-bar moves to the top. The
wiper moves toward you and the carriage moves away from
the station.
16. Open the maintenance cover.
17. Clean the wiper.
Use and push a swab contained cleaning liquid
to take off some dust on the felt surface.
Use a swab contained cleaning liquid to take off
some inks on the rubber surface.
Do not rub the
felt surmace
Rubber surface
NOZZLE CL EANING
WA I T T IMER= 1mi n
NOZZLE CL EANING
WA I T T IMER=10mi n
INTIALIZING
PLEAS E WA I T
STORAGE WASH
00 :
**
:
**
CLEANING
00 :
**
:
**
WIPER CLEANING
COMPLETED : ent