Instruction manual

- 4.20 -
7. Holding the projections at both ends, draw out
the wiper.
Use the gloves that are supplied with the separately-available
cleaning wiper to protect your hands from stains.
8. Use a swab soaked with the cleaning liquid to
clean off ink blots on wiper and bracket.
• If dirt of curl is serious, replace the wiper with
a new one. At the time of replacement, be
sure to terminate the machine operation and
follow the wiper replacement procedure.
9. Holding the projections at both ends, insert a
clean wiper into place.
10. Press the [ENTER] key.
11.Fill the cap with the cleaning liquid using a
syringe.
FILL UP WASHINGS
COMPL ETED : ent