Instruction manual

- 4.4 -
Maintenance functions
Press the [FUNCTION] key and set up the desired maintenance function.
Drawing setup conditions [LIST]
This function outputs the current settings of the printer.
They are useful in carrying out maintenance of the printer.
Explanation of the list
1. SETUP : Indicates a value that is specified with the FUNCTION.
2. PRINTadjust : Indicates a correction value for dot position.
3. REPLACE COUNTER : Indicates the number of times the ink cartridges are
replaced.
4. VERSION : Indicates the version of the firmware and memory
capacity of the device.
5. PARAMETER : Used for service persons for maintenance.
STEPS:
1. Select [LIST] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
Printing the LIST is started.
The menu enters the LOCAL mode.
LIST
<< LOCA L> >
width:1272mm
MA I NTENANCE
LIST <ent>
PR I NTI NG
PLEASE WA I T