Instruction manual

- 3.24 -
Continuing printing after [Ink Near End] [PRINT CONT.]
If the remaining amount of ink decreases during printing and [Ink Near End] appears, you can
replace ink for each ink station and then continue printing for the next file.
ON : Even if [INKnearEND] appears, you can use only one ink station to
continue printing for the next file.
OFF : When printing for the file with [Ink Near End] occurrence is completed,
you need to replace ink.
• If different types of ink are set in the two ink stations, this function cannot be
used since [PRINT CONT.] is not displayed on the LCD.
• If [Ink End] occurs during printing, printing is stopped.
STEPS:
1. Select a type. (See page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [
] and [ ] to select
[PRINT CONT.].
4. Press the [ENTER] key.
5. Press the JOG keys [
] and [ ] to select [ON] or
[OFF] of the [PRINT CONT.].
Here, select [ON].
6. Press the [ENTER] key.
7. Press the [END] key twice.
The menu returns to the LOCAL mode.
SETUP
SELECT :
TY PE . 1
T YPE1
MED I A COMP. <ent >
T YPE1
PR I NT CONT . <en t>
T YPE1
PR I NT CONT . <en t>
<< LOCA L> >
width:1272mm
T YPE1
PR I NT CONT . :OFF
T YPE1
PR I NT CONT . :ON